|
|
High masts with mobile crown - Handle
|
|
|
|
Shaft: It has a conical shaped trunk with polygonal cross section, made up of S355 J2G3 UNI EN 10025 sheet steel press-folded and longitudinally welded. Space is provided in the base section for the winch and for electrical switchgear and wiring.
Top of the pole: the return pulley for operating the cable is positioned at the top of the pole. At the upper extremity of the pole the following fixtures are also mounted:
• hooking device of the mobile platform to reduce load on the rope from the weight of the crown and the floodlights;
• antirotation dowel pins (pivots) designed to neutralize the force of the wind on the floodlights.Mobile crown: made of steel, accepts installation of floodlights and control gear. It locks at the top of the pole through a mechanical hooking device.
Cable: in high corrosion resistant galvanized steel.Carriage: Constructed of hot-galvanized steel sections. The movement of the aluminium guide is controlled by sliding blocks/shoes. The hooking is achieved with two laminated steel rods.
Motion control unit is constituted by a winch controlled by a handle.
Electrical accessories: an interlocking socket is positioned inside the housing at the base of the mast, for the sectioning of the line for the power of the floodlights. This cable is fixed inside the masts.
Protection cover: the electrical and hooking devices at the top are protected by a fi bre glass dome cover.
Finishing: the complete structure is hot dip galvanized according to standards UNI EN ISO 1461.
|
|
Request information about this product
| Code | Description | Add to |
|---|
| 09.06.22.03.00000100 | h=16mt kg=650
h=16mt kg=650 | |
| 09.06.22.03.00000101 | h=18mt kg=750
h=18mt kg=750 | |
| 09.06.22.03.00000102 | h=20mt kg=900
h=20mt kg=900 | |
|
|
|
|
FUSI
Products 
Vendita cavi elettrici